– Lotes Industriales en Parque Industrial Mérida**

Desarrollo industrial conformado por 256 lotes modulares con superficies desde 1,000 m² hasta 30,000 m², disenado para atender distintos giros como bodegas, almacenes, industria ligera no contaminante, talleres, oficinas, locales comerciales y estación de servicio. Ubicado estratégicamente sobre la carretera Mérida–Hunucmá, en la ruta Mérida–Tetiz, a 4 km de la Cervecería Modelo en Yucatán, lo que garantiza conectividad y alto potencial logístico.

El parque contará con infraestructura integral que incluye lotes urbanizados y opción de proyectos llave en mano, estacionamiento para tráiler (interior y exterior), amplias vialidades, red eléctrica, fibra óptica interna, red contra incendios y red hidráulica, brindando condiciones óptimas para operación industrial y comercial.

**Características del lote tipo:**

* Superficie: 2,550 m²
* Precio de promoción: $1,690 MXN/m²
* Enganche: 30%
* Financiamiento: hasta 24 meses
* Precio de contado: $1,605 MXN/m²

Valor actual estimado: $2,200 MXN/m², con proyección de incremento al concluir la urbanización, ofreciendo una plusvalía estimada del 30.2% en 24 meses, lo que representa una oportunidad sólida de inversión a mediano plazo. The two industrial warehouses are located in the Central Business Park (C B P) at Km 11+200 Mérida – Tetis, Tablaje C.P. 3559, 97357.Ucu, Yucatán

With the following characteristics:
1.- Lot 123 and 124 of 2,500 m2 each,
2.- 24 perforations were made in the stone floor with a diameter of 36 for each of the 24 steel columns
3.- There are 24 steel columns of 20 diameter with a thickness of 1/2 and a total length of 9 meters, leaving 3 meters in the stone perforations and 6 meters free taking the level of the finished floor,
4.- 14 x 6 steel joists were installed on top of the columns for structural closure
5.- A perimeter wall of 3.00 meters high was installed on the two lateral axes of the warehouses and in the two parts of the back Foundation, Chain, Block, Castles and Upper Closing Chain
6.- On the upper chain, there is 3.00 meters high 22-gauge corrugated sheet metal for the perimeter closure of the naves
7.- On the 03 axes of the two naves, a 1/4 plate channel was installed longitudinally to receive the two arched roofs and also to function as a rain gutter
8.- There are two arched roofs covering 3,360 m2 of 18-gauge Pintro sheet metal of the order of 50 tons and translucent sheet interleaved for natural lighting
9.- Remaining with a height from the finished floor to the top of the arched roof of 10.50 meters
10.- The floor is 6 meters from the top of the column and 4.50 meters of arrow, with a clear height at the center of 10.50 meters.
11.- MR42 concrete floor with polypropylene fiber and polished finish

Notes:
1.- The structures have the capacity to mount an overhead crane.
2.- All structural steel is protected by a marine industrial painting process, which consists of sandblast cleaning and anti-corrosion paint application. (ref:618312)